A national poll released by the Assn. of Equipment Manufacturers (AEM) found that voters strongly support federal funding for water pipelines...
Guidance will clarify means of compliance with 2005 Amendments to the Safe Drinking Water Act
The U.S. Environmental Protection Agency (EPA) recently released draft underground injection control program permitting guidance for class II wells that use diesel fuels during hydraulic fracturing activities.
EPA developed the draft guidance to clarify how companies can comply with a law passed by Congress in 2005, which exempted hydraulic fracturing operations from the requirement to obtain a UIC permit, except in cases where diesel fuel is used as a fracturing fluid.
The draft guidance outlines for EPA permit writers, where EPA is the permitting authority, requirements for diesel fuels used for hydraulic fracturing wells, technical recommendations for permitting those wells, and a description of diesel fuels for EPA underground injection control permitting. The draft guidance describes diesel fuels for these purposes by reference to six chemical abstract services registry numbers. The agency is requesting input on this description.
While this guidance undergoes public notice and comment, decisions about permitting hydraulic fracturing operations that use diesel fuels will be made on a case-by-case basis, considering the facts and circumstances of the specific injection activity and applicable statutes, regulations and case law, and will not cite this draft guidance as a basis for decision.
EPA continues to work with states, industry and other stakeholders to help ensure that natural gas is developed safely and responsibly. EPA will take public comment on the draft guidance for 60 days upon publication in the Federal Register to allow for stakeholder input before it is finalized.
For more information, click here.